Pure brick

If you choose the pure effect of brick, the joints are a disturbing element. More and more house builders prefer joint free façades. By choosing ZERO you create this effect in a traditional way. Of course, you can also process our bricks by bonding them or using thin-bed mortar.  Hereby you will have the choice of more than 100 different colors.

• Glue: When bricks are glued the traditional mortar is replaced by a glue mortar which is sprayed onto the brick surface using a pump or a spray gun. This technique can re- duce the joint width to about 4 mm.
• Thin bed mortar: is half-way between a mortar and a glue. It is cheaper than gluing, but the joint-width can only be reduced to around 6 mm.
• ZERO: Traditional bricklaying with a joint-free look.

Zero®

Your benefits with Zero®

• Money and time saving as there is no need to place scaffolding for joint work. You will need more bricks, approximately 90 per sqm.
• Your joint-free façade can be laid traditionally using a trowel and mortar. So you do not need any special tools.
• A typical upward positioning of the brick ensures that no excess mortar can drip down to mark the brickwork.
• A clean façade for longer, because facing brick holds on to less dirt than a joint.
• Thin, open perpends ensure excellent cavity wall ventilation and prevent insect nests from bees and wasps etc.
• Pure, flawless brick façade with a modern look, in which the colour of the bricks is not affected by the colour of the joints.
• Results immediately visible.